Roof Access Walkways, Roof Duck Boards, Roof Crawling Boards
FIBREGLASS ANTI SLIP ROOF WALKWAYS FOR SAFE ACCESS
Fibreglass Anti-Slip Grating for Roof Access Walkways to Meet Health and Safety Requirements. Fitted Handrailing Optional.
Gritted Anti Slip Walkways
Fibreglass Grating is the first and only roof walkway system to have high strength and a gritted walkway surface that provides one of the highest degrees of slip resistance ever measured especially in rain, frost, ice and snow conditions.
Non Slip Fibreglass Grating For Roof Gully Walkways. Ideal to replace old wooden slippery crawling boards.
Roof Walkways CuttTo Size
Each panel size can be specified to suit individual client requirements but would usually be at least 600 mm wide as required by HSE recommendations.
Fibreglass Anti-Slip Roof Walkways Provide Excellent Safety Standards with Minimal Maintenance. Fitted Handrailing Optional.
Fibreglass Anti Slip Grating
Fibreglass anti slip grating roof walkways are often used to replace rotten and slippery timber deck boards. The angular quartz grit embedded into the top walking surface of fibreglass grating provides one of the highest degrees of slip resistance ever measured, especially in wet, oily and icy conditions.
Fibreglass Grating Meets Health & Safety Standards for Flat Roof Walkways – 45°/90° Turns are Available. Handrailing Optional.
Valley Gutter Roof Walkways
Fibreglass anti slip roof walkways are often placed above valley gutters particularly on older buildings. Anti slip roof walkways above roof gutters provide a flat, dry and safe method of access. Fibreglass handrailing systems can be fitted one or both sides of the walkway for added safety and security.
Anti-Slip Walkways For Standing Seam, Corrugated And Pitch Roof Up & Over Systems.
Pultruded Fibreglass Handrailings
Pultruded fibreglass handrailings can be supplied fitted to one or both sides of walkways according to safety standards and conditions.
Fibreglass Anti-Slip Grating Roof Walkways Are Used To Replace Slippery Duck Boards. Handrailing Systems Optional.
Fibreglass Roof Access Walkways
In addition to improving safety standards fibreglass roof walkways provide excellent chemical resistance is easy to install and offers long term durability. The gritted anti-slip surface has one of the highest degrees of slip resistance ever measured for a walking surface.
These products are ideally suited for Gully Covers, Fibreglass Gully Covers, Cat Walks, Access Platforms, Roof Walkways, Roof Catwalks and Mezzanines.
Fibreglass Grating Roof Access Walkways Provides the Highest Degrees of Slip Resistance in Wet and Icy Conditions.
Anti Slip Walkways For Flat Roofs
Fibreglass anti slip grating is suitable for flat roofs of all types including corrugated or standing seam roofs. Double foot barriers reduce the point loading on single ply roofs, and a 75 mm high bearer lifts the walkways above the profiles on corrugated or standing seam roofs.
Anti Slip Surface
Angular Quartz is integrally bonded to the walkway surface, which produces an extremely long-lasting hardwearing surface. This gritted anti-slip texture has one of the highest degrees of slip resistance ever measured for a walking surface.
- Roof Walkways
- Crawling Boards
- Roof Gullies
- Roof Valley Walkways
- Roof Decking
- Roof Access
- Anti Slip Surface
- Fire Resistant
- Corrosion Resistant
- Impact Resistant
- Minimal Maintenance
Panel Thickness & Mesh Size Information
British Standard Slip Resistance Test Results
The B.S. 4592 test was devised to test and assess the slip resistance of industrial type flooring intended for use in water and wet areas. A co-efficient of friction (CoF) is calculated by determining the mean angle of inclination that an operator can safely maintain when the flooring is subjected to a continuous stream of water.
Standard colours are Green and Grey, other RAL colours available on request for volume orders.
Note: Due to the printing process colours shown are a guide only.