Dura Deck Tile Resist Interlocking Decking Tile Mahogany Pack of 6

£65.28 ex. VAT

Length: 605mm | Width: 305mm | Thickness: 25mm | Tiles per box: 6

Transform your outdoor space into a beautiful, ready-to-use decked area in minutes without the need for a professional landscaper, complicated bearers or costly fixings.

These easy-to-lay interlocking composite deck tiles require no specialist tools or skills.

Each individual Dura Deck Tile Resist tile measures L605mm (2ft) x W305mm (1ft) x D25mm  – meaning you can cover 1.10m2 (11.8 ft2) with each box of 6 tiles.

Available in two great colours, Pebble Grey and Mahogany, the tiles can be used to cover unsightly areas to refresh the look of your garden or create a brand-new decking area in a matter of minutes. Enjoy maximum impact with minimal effort and cost!

How much do you need? Try out our Tile cost calculator here >>

587 in stock

SKU: FTR3001 Category:

Install Instructions

Our composite decking tiles are the perfect DIY product, providing an instant transformation without the need for bearers or costly substructures. They can be installed on virtually any hardstanding or flat area where the ground is level. Dura Deck Tile Resist has a unique patent-pending base design which mitigates the risk of damage or piercing to any underlying weed membranes you might choose to add.


Animated image of decking tiles being laid

Step 1

Work out how many tiles you’ll need

To work out how many deck tiles and or ramps you’ll need for your project, first calculate the square meterage (m²) (or square footage) of the area (length multiplied by width) and divide by the tile coverage. A good rule of thumb is to order 10% more tiles than your measurements say you need, to allow for any wastage.

Dura Deck Tiles won’t interlock when laid on uneven surfaces, so you must be sure to fix any issues before starting. Make sure your area has been treated with weedkiller beforehand, and if your area is prone to weeds, you may choose to also add a layer of good-quality weed control fabric prior to installation.


Animated image of decking tiles being laid

Step 2

Laying your Dura Deck Tiles

If you’re installing on top of concrete, sweep the area clean first. If there are small cracks of less than 10mm, tiles can be laid straight on top as long as the sides of the crack are even. If they’re uneven, you’ll need to repair them first with some patching filler or compound.

To lay the first Dura Deck Tile, start from a corner and work outward. The tile bases click together easily without the need for undue pressure. Keep connecting the tiles together until you have covered the entire area, and the surface is flush and level. If you need to, you can use a jigsaw or mitre saw to cut the last few tiles to your required dimensions and guarantee a perfect fit. If you prefer a decorative finish, you may wish to add a layer of stones or aggregate to finish your decking area.


Decking tiles laid around a exposed drain

Step 3

Cut the Dura Deck Tiles

If you have good DIY skills, you can also use a jigsaw to cut the deck tiles to fit around an obstruction.

Mark out the area to size on a piece of cardboard to use as a template, and make sure to avoid any screws on your cut line from the base of the tile.

Cut your Dura Deck Tile according to your template, and use sandpaper to smooth the rough edges. You can now lay the tile as you would normally.


Tiles being slotted into outside ramps

Step 4

Add Outside Ramps (Optional)

Once you’ve finished installing your tiles, you can finish the outer edge where your interlocking tabs will be visible. You can use pebbles or gravel to create a transition area between the deck and the house or lawn for example, or for a more professional finish you can opt to add Dura Deck Tile Corner and/or Edge Ramps to finish the area.

To install the ramps, you should begin by lifting the adjacent Dura Deck Tile up, and pushing the tile back down into the Corner Ramp to lock into place.


Tiles being slotted into outside ramps

Step 5

Complete your decking area with the Edge Ramps, filling in the space between each Corner Ramp by lifting the adjacent Dura Tile upward and pushing this tile back down into the interlocking tabs of the Edge Ramp.


Completed composite decking tile installation

Step 6

Completion

Brush down the area to remove any debris. With Dura Deck Tiles, there’s no need to wait before adding your furniture, plants or accessories onto your deck – so you can enjoy your new space as soon as you’ve finished the installation!


Specifications

Dura Deck Tile Resist Profiles

The combination of the beautiful traditional appearance of wood and durability of composite timber makes Dura Deck Tile Resist ideal for both new installations or for tiling over unsightly or unwanted outdoor areas. The advanced material composition meets modern standards set by architects, designers and specifiers. All you need is an existing firm, flat, hardstanding surface to install our composite decking tiles.

Dura Deck Tile Resist is produced via a co-extrusion process where a 360° outer armour is used to protect the core of the tile boards from the elements.

The interlocking base means the tiles are easy to lay and large areas can be installed quickly as no bearers or fixings are required. Corner and Edge Ramps interlock with the tile to create an outer row providing a smooth, safe, angled transition between the tile and hard surface.

PRODUCT THICKNESS LENGTH WIDTH WEIGHT PER TILE ITEM PER BOX
Dura Deck Tile Resist 25mm 605mm 305mm 2.52kg 6
Corner Edge Ramps 25mm 367mm 77mm 0.43kg 4 (2 left & 2 right)
Straight Edge Ramps 25mm 295mm 77mm 0.36kg 15

Anti-Slip Resistances

SLIP RESISTANCE VALUES – BS7976*
DIRECTION CONDITION WOODGRAIN PENDULUM TEST VALUES (PTVs)
Longitudinal Dry 44 Low Slip Potential (36+ PTV)
Transverse Dry 52 Low Slip Potential (36+ PTV)
Diagonal Dry 45 Low Slip Potential (36+ PTV)
Longitudinal Wet 37 Low Slip Potential (36+ PTV)
Transverse Wet 37 Low Slip Potential (36+ PTV)
Diagonal Wet 48 Low Slip Potential (36+ PTV)

*(4S Rubber Slider) Pendulum Test Values (PTVs)
Low Slip Potential (36+ PTV) – Moderate Slip Potential (25-35 PTV) – High Slip Potential (0-24 PTV)

Easy to Fit

Whatever your DIY skill level, you’ll find Dura Deck Tiles EFFORTLESS TO FIT and each box also comes with a reassuring 15-year manufacturer’s warranty so you can install with confidence.

Dura Deck Tile Resist beats all other deck tiles on the market and can be added on top of any existing firm & flat surface with NO SPECIAL PREPARATION REQUIRED.

There’s no need for a costly substructure, bearers or fixings, meaning you can ACHIEVE A PROFESSIONAL LOOK, but without the need to employ a landscaper and without spending money on an expensive joist system.

The tiles can be used both indoors and out, and are the perfect exhibition or marquee flooring option. They are also ideal for PATIOS, COURTYARD and ROOF GARDENS, BALCONY or POOL DECKING, TERRACES and FLAT ROOFS – and are easy to transport and handle.

No EXPERIENCE IS NEEDED, simply click the tiles together to create your deck.

Barefoot Friendly

The composite timber surface is SMOOTH AND SPLINTER FREE and is CERTIFIED with low slip potential even in wet conditions. A clever 360° outer armour is used to protect the core of the tile boards from the elements, making them resistant to fading and water absorption, and meaning you’ll never need to paint or treat them. The tiles are wind uplift certified for your peace of mind. They can safely be fitted to balconies and exposed areas and won’t dislodge in high winds.

Delivery, Returns & Exchanges

Delivery

Standard lead time on orders is 3 – 5 working days (Mainland UK; stock dependent).
Large orders may be subject to palletized deliveries which are to the property kerbside only. Your Dura Deck Tile Resist order will need to be unloaded by hand (hand-balled) off the lorry side. A person must be present to help unload the goods and sign for receipt. Delivery drivers are not insured to help unload the goods beyond the property kerbside.
Returns & Exchanges Policy

If you wish to return or exchange your goods, please complete the form dispatched with your order and return within 14 days to the address below. Items must be unused and in perfect, resale condition and in their original packaging, and the Returns Form must be included. Once the goods have been received and inspected to check they meet the requirements outlined above you will receive a refund (credited back to the method you paid with) or a new shipping notification for your requested exchange within 7 working days of receipt. The replacement item(s) will be shipped to you free of charge (once per customer). Please note we cannot exchange items of differing value. If you choose to return any items that were purchased as part of a promotion, and by returning part of your order your remaining total means you are no longer eligible for the original discount, the value of that discount will be deducted from any refunds due.

Please note the customer is responsible for the postage to return the item to us. We recommend using a Signed For recorded postal service as Dura Composites Ltd are not liable for any items that go missing en-route back to us. Thank you for your cooperation. Returns should be sent to:

Dura Composites Ltd

Returns Dept.

c/o Vdepot

Honingham Thorpe Business Park,

Norwich Road, Colton,

Norfolk, NR9 5BZ