+44 (0)1255 423 601 info@duracomposites.com

Extreme Anti Slip Fibreglass Grating for Roof Walkways, Duck Boards and Crawling Boards

Fibreglass anti slip grating for roof walkways to meet health and safety requirements.

Roof Walkways

Fibreglass grating is the first and only roof walkway system to have high strength and a gritted walkway surface that provides one of the highest degrees of slip resistance ever measured especially in rain, frost, ice and snowy conditions. Various fibreglass handrail safety barrier systems are available for roof walkways according to specific requirements.

Anti slip fibreglass grating for roof top walkways. Ideal to replace old wooden slippery roof duck boards.

Roof Duck Boards

Each roof duck board panel size can be specified to suit individual client requirements but would usually be at least 600 mm wide as required by HSE recommendations. The roof duck boards can also incorporate step-over pipe crossings complete with hand railing systems.

Fibreglass anti slip roof crawling boards offer excellent safety standards with minimal maintenance.

Roof Crawling Boards

Fibreglass anti slip roof crawling boards are often used to replace rotten and slippery timber deck boards. The angular quartz grit embedded into the top walking surface of fibreglass grating provides one of the highest degrees of slip resistance ever measured, especially in wet, oily and icy conditions. Fibreglass  roof crawling boards have consistently reduced the quantity of accidents in all types of industrial locations particularly when a fibreglass tubular hand rail system is incorporated into the design.

Fibreglass Grating Meets Health & Safety Standards for Flat Roof Walkways – 45°/90° Turns are Available. Handrailing Optional.

Valley Gutter Roof Walkways

Fibreglass anti slip roof walkways are often placed above valley gutters particularly on older buildings. Anti slip roof walkways above roof gutters provide a flat, dry and safe method of access. Fibreglass handrailing systems can be fitted one or both sides of the walkway for added safety and security.

Anti-Slip Walkways For Standing Seam, Corrugated And Pitch Roof Up & Over Systems.

Pultruded Fibreglass Handrailings

Pultruded fibreglass handrailings can be supplied fitted to one or both sides of walkways according to safety standards and conditions.

Fibreglass Anti-Slip Grating Roof Walkways Are Used To Replace Slippery Duck Boards. Handrailing Systems Optional.

Fibreglass Roof Access Walkways

In addition to improving safety standards fibreglass roof walkways provide excellent chemical resistance is easy to install and offers long term durability. The gritted anti-slip surface has one of the highest degrees of slip resistance ever measured for a walking surface.

These products are ideally suited for Gully Covers, Fibreglass Gully Covers, Cat Walks, Access Platforms, Roof Walkways, Roof Catwalks and Mezzanines.

Fibreglass Grating Roof Access Walkways Provides the Highest Degrees of Slip Resistance in Wet and Icy Conditions.

Anti Slip Walkways For Flat Roofs

Fibreglass anti slip grating is suitable for flat roofs of all types including corrugated or standing seam roofs. Double foot barriers reduce the point loading on single ply roofs, and a 75 mm high bearer lifts the walkways above the profiles on corrugated or standing seam roofs.

Anti Slip Surface

Angular Quartz is integrally bonded to the walkway surface, which produces an extremely long-lasting hardwearing surface. This gritted anti-slip texture has one of the highest degrees of slip resistance ever measured for a walking surface.


  • Roof Walkways
  • Crawling Boards
  • Duckboards
  • Roof Gullies
  • Roof Valley Walkways
  • Roof Decking
  • Roof Access


  • Anti Slip Surface
  • Lightweight
  • Fire Resistant
  • Corrosion Resistant
  • Non-Magnetic
  • Impact Resistant
  • Minimal Maintenance

Panel Thickness & Mesh Size Information

British Standard Slip Resistance Test Results

The B.S. 4592 test was devised to test and assess the slip resistance of industrial type flooring intended for use in water and wet areas. A co-efficient of friction (CoF) is calculated by determining the mean angle of inclination that an operator can safely maintain when the flooring is subjected to a continuous stream of water.


Standard colours are Green and Grey, other RAL colours available on request for volume orders.

Dark Green
RAL 6010
Light Grey
RAL 7047

Note: Due to the printing process colours shown are a guide only.