Mini Mesh grating for corrosion resistant applications such as trench, gully and duct covers
Mini Mesh grating has one of the highest degrees of slip resistance ever measured for a walking surface.
Mini Mesh grating
Mini Mesh grating has a 12mm x 12mm open mesh area compared with standard 32mm x 32mm square mesh grating. The smaller openings of Mini Mesh grating prevent objects as small as 12mm from falling through, and complies with the European 15mm ball falling test requirement. Also, because of the close spacing of the bearing bars, Mini Mesh grating provides smooth movement for small wheeled trolleys, wheelchairs etc.
Trench grating for health and safety requirements. High strength, light, various thicknesses and panel sizes.
Trench grating is lightweight and chemical resistant which makes it ideal for the chemical, port and harbour industries. Mini Mesh grating is suitable for various applications as its weight is approximately one third of traditional steel grating and has the added benefit of being corrosion resistant. The chemical resistance of trench grating can be used for walkways in corrosive environments as well as offering many other advantages.
Gully grating is long lasting, low maintenance and has an anti-slip surface to meet health and safety requirements for all industries.
Gully grating has been successfully used in many industries including, aerospace, food processing, beverage, chemical processing, water and waste treatment, metal finishing, pulp and paper production, transportation, pharmaceuticals, textiles, oil and gas industries, mining, smelting and refining. The integral gritted walking surface of gully grating provides long lasting protection and is the ideal replacement for corroded and deformed metal grating. Smaller mesh sizes of Mini Mesh grating are suitable for small wheeled trolleys and wheelchairs, and prevent small objects from passing through.
Mini Mesh grating has super strength, is anti-slip and is ideal for duct grating and can be easily installed.
Duct grating is lightweight, chemical-resistant, non-conductive, anti-slip, impact and fire resistant, and unlike metal grating will not rust, and never needs painting. Three top surface finishes are available; gritted for maximum anti-slip properties; concave surface anti-slip and smooth for special purposes. Duct grating is an ideal substitute or replacement for stainless steel, aluminium and galvanised steel grating.
- Assembly Lines
- Work Stations
- Wash Bays
- Anti-Slip Surface
- Fire Resistant
- Corrosion Resistant
- Impact Resistant
- Maintenance Free
- Attractive Design
British Standard Slip Resistance Test Results
The B.S. 4592 test was devised to test and assess the slip resistance of industrial type flooring intended for use in water and wet areas. A co-efficient of friction (CoF) is calculated by determining the mean angle of inclination that an operator can safely maintain when the flooring is subjected to a continuous stream of water.
Standard colours are Green and Grey, other RAL colours available on request for volume orders.
|Dark Green||Light Grey||Safety Yellow|
Note: Due to the printing process colours shown are a guide only.