Dura Deck Resist
Premium Performance & Looks
Advanced co-extrusion technology with a highly engineered protective 360 degree outer armour. Designed with Premium Performance and Looks in mind.
Dura Deck Resist 150 is our premium decking board choice if you require a high specification or if your budget allows.
It features our most beautiful surface ever and is designed to achieve the most natural wood look on the market.
This deck is produced via a co-extrusion process where a 360 degree outer armour is used to protect the core of the deck from the elements.
As a result, Dura Deck Resist is fire resistant to Class B, colour fade resistant, strength load resistant, stain resistant and also highly slip resistant.
It is available in 6 colours to suit all tastes, all of which feature a stunning deeply embossed wood grain on one side and a light groove on the reverse for maximum versatility.
Available in lengths of 3.66m, it is easy to install and has a fantastic 15 year warranty. Dura Deck Resist never requires painting or treating and is easy to clean.
Dura Deck Resist Colours
Our Dura Deck Resist decking boards are available in six colours. Colour samples are available on request, or for large orders, bespoke colours can be selected.
Please note that colours shown are representative only; actual colours may vary slightly. Whilst Dura Deck is relatively colour stable, there will likely be some initial colour lightening as the product weathers, which typically occurs in the first 3 months.
Our manufacturing process results in a high level of colour consistency although some variation in colour may be apparent across boards from different production batches.
Dura Deck Resist in Mahogany
Dura Deck Resist in Pebble Grey
Dura Deck Resist in Red Cedar
Dura Deck Resist in Larch
Dura Deck Resist in Weathered Cedar
Dura Deck Resist in IPE
Engineered to resist ignition of fire to BS EN 13501 Class B fl S1 to satisfy current and future fire legislation.
The Vortex Void design structure and unique material composition allows the deck to withstand 1.4kN point load according to BS 6399-1:1996 and to resist significant deformation or sag for its expected working life.
Unique outer armour protects against fade for its entire life so that your deck always looks like it did when it was brand new.
The revolutionary outer armour protects the deck surface from common stains like ketchup, mustard, tree sap and even cooking oil. Just wipe immediately with a clean wet cloth to remove common spills or use a pressure washer for more stubborn debris such as bird mess.
The latest technology and cutting edge production techniques means that Resist features a rate of expansion that is less than half of its competitors. This means the deck will look great whether it’s hot or cold and is more forgiving on imperfect installs. This is due to the 360 Armour and the incredibly low water absorption rate achieved through a close cell structure.
The fantastic wood effect surface features a unique finish that allows the product to achieve low slip potential in dry or wet conditions, whatever the direction of travel. When planning your deck, please note that other manufacturers use the irrelevant 5S slip test as their benchmark, which is easier to achieve and relates to roads, not walkways. We don’t!
|1.5kN at 400mm|
(BS 6399-1: 1996)
Wet and Dry
(less than 0.2%)
(Min 5.7 /
|Dura Deck Resist|
|Soft Wood Decking|
|Hard Wood Decking|
|Product||Board Type||Board Thickness||Board Length||Board Width||Max Span||Weight / Lin m||Weight per Length||Boards per Pallet|
|Resist 150||Hollow||25mm||3660mm||150mm||400mm||3.10Kg||11.35Kg||168 Pcs|
|Resist 150||Solid||25mm||3660mm||150mm||400mm||4.94Kg||18.08Kg||100 Pcs|
|Test Item||Test Parameter||Dura Deck Resist Test Results|
|Linear Thermal Expansion (Lengthways)||Test method: ISO 11359-2:1999 Method A Rate of temperature: 3 °C/min||36×10-6 K-1|
|Water Absorption||Test method: EN 317:1993||0.18%|
|Density||Test method: ASTM D792-13 Method B||1.27 g/cm3|
|UV Light Ageing Test||Test method: ASTM G154-16 & ASTM D2244-16 UV Exposure cycle: Exposure duration: 1000h||ΔE*ab = Grey Scale 5.72|
|Tensile Strength||Test method: ASTM D638-14||19.1 Mpa|
|Flexural Strength||Test method: reference to ASTM D7032-17 Section 4.4 and ASTM D4761-13 Section 8||25.3 Mpa|
|Low Temperature Effect (-29 ±2°C)||Test method: ASTM D7032-17 Section 4.5.1 and ASTM D4761-13 Section 8||33.9 Mpa|
|High Temperature Effect (52 ±2°C)||Test method: ASTM D7032-17 Section 4.5.1 and ASTM D4761-13 Section 8||16.9 MPa|
|Moisture Effect (85%RH)||Test method: ASTM D7032-17 Section 4.5.2 and ASTM D4761-13 Section 8||27.3 MPa|
|Freeze-Thaw Effect||Test method: ASTM D7032-17 Section 4.7 and ASTM D4761-13 Section 8|
Freeze-thaw exposure cycle : 1 Submerge underwater for 24h→2 -29°C, 24h→3 23±2°C,
24h→Step 1~3 as one cycle, total three cycles
|Flexural Strength after freeze-thaw resistance: 24.9 Mpa|
|Flexural Stiffness||Test method: reference to ASTM D7032-17 Section 4.4 and ASTM D4761-13 Section 8||Flexural Stiffness: 4160 Mpa|
|Resistance to Indentation||Test method: EN 15534-1:2014 Section 7.5||Brinell hardness: 61.5 Mpa|
|Charpy Impact Strength||Test method: EN ISO 179-1:2010||2.6 kJ/m2|
|Flammability Resistance||Test method: EN13501-1 (EN ISO 9239-1) and (EN ISO 11925-2)||Bfl-S1 – As Standard|
|Slip Resistance Values – BS7976 (4S Rubber Slider)||Pendulum Test Values (PTVs)|
Pendulum Test Values (PTVs)
Low Slip Potential (36+ PTV)
Moderate Slip Potential (25-35 PTV)
High Slip Potential (0-24 PTV)
Step 1: Secure the first board in position by screwing the start stop clips into place along the bearers. Push the first board into the clips, making sure that the clips hold the deck board securely.
Step 2: Position the standard fixing clip into the side channel of the board and screw down. Make sure they “pinch”. Push the next board into place and repeat. Ensure you check the alignment of the boards each time.
Step 2A (OPTIONAL): If your boards butt join across a bearer, Double Clips can be used for extra support during expansion.
Step 2B (OPTIONAL): If installing adjacent to a wall, Half Clips can be used to for easier fitting.
Step 3: To secure the final board on the deck edge, use 1 start stop clip per bearer or every 400mm on the parallel bearer (as demonstrated).
Step 4: Secure standard clips on both sides and slide second to last board into position (leaving an adequate gap between any abutting board).
Step 5A (Finishing Option): Place end caps to finish your deck.
Step 5B (Finishing Option): If using fascia to finish your deck, elongated holes should be used to allow for expansion and contraction.
Our Essential Guide to Getting the Most From Your Dura Deck
Whether you’re planning a commercial or residential decking project, Dura Composites has a durable, simple to install, cost-effective and environmentally friendly solution to help maximise the use of outdoor space in all seasons.
Our high-performance composite decks combine fade-resistance with outstanding durability and mean you can spend less time maintaining your deck and more time enjoying it. To ensure you get the best results, we recommend working with a professional contractor with previous decking installation experience.
Please ensure that the guidance provided here and in our supporting Technical Install Manual are strictly adhered to as improper installation (including the use of non-approved trims, fixings and accessories) will invalidate your product warranty.
- To activate your product warranty after purchase, please complete the online form: www.duracomposites.com/warranty
- To download the Dura Composites detailed Technical Manual, please visit: www.duracomposites.com/decking/composite-decking/install-technical-manual/
When planning your Dura Deck, please bear in mind the key considerations below.
1. Safety First
Before installing any decking product, you should review local building codes and regulations, and consult with local building officials to ensure compliance and safety.
Wear protective clothing and safety equipment where necessary such as safety glasses, gloves, dust masks and long sleeves, particularly if cutting in confined spaces.
Refer to the operator’s manuals for safety guides for all power tools used.
2. Storage and Handling
To ensure the best performance of our products, it is vital that proper care and attention is given to storage and handling of materials. Please ensure you adhere to the following guidance:
- Store the products on a flat and level surface in their original packaging until you are ready to install them.
- If stored outdoors the pallets must be kept wrapped to prevent exposure to direct sunlight and weathering.
- Take care to ensure that boards are not stacked adjacent to sources of moisture.
- Professional fork lifts should always be used while uploading and discharging pallets. Pallet stacking should not exceed 4 pallets maximum.
3. Choose the Right Product for Your Needs
Our narrower boards can look more traditional as they more closely resemble natural wood boards (Eco 146, Resist 150). However, if your priority is to make installation speed as quick as possible, then choose a wider board (Eco 295).
Our boards also offer the option of a wood grain surface finish, or grooved surface design on the reverse, the choice is yours.
Be aware that very large or raised decks may require planning permission.
Raised decks should not be built with the deck level more than 600mm above ground level without specialist advice.
4. Thermal Expansion and Contraction
Extremely warm or cold outdoor temperatures play a significant role in the installation and performance of all decking products.
Following the detailed installation instructions in our supporting Technical Manual will help manage and reduce the effects of thermal expansion and contraction. Please refer to the gap guide in our Technical Manual to ensure your boards have adequate space for expansion and contraction and to preserve the service life of your decking.
Please ensure that you allow Dura Deck to acclimatise to the exterior temperature before cutting and installing.
5. Care and Maintenance
Once you have completed the install of your Dura Decking, we advise that the decking is either washed down thoroughly with a yard broom or pressure washed to ensure that a good clean surface is ready for you to enjoy.
Spray with hose to remove surface debris. Use warm soapy water and a soft bristled brush to clear dirt and/or debris from grooves/contours.
Pressure washers up to 1500psi may be used to maintain cleanliness of your Dura Deck. In order to prevent any damage, always keep the pressure washer nozzle at least 15cm (6 inches) from the surface, and avoid concentrated spraying on one area for more for more than 3 seconds.
Dura Composites’ innovative subsurface fixing systems means no nails or screws need to go through the deck itself, creating a smart, uniform and barefoot friendly deck.
Our unrivalled range of fixings cater for a wide range of installations in different environments. Our expert team and downloadable Installation and Technical Manual can provide further guidance on appropriate use of these fixing solutions and screw types.