Call Now On
+44 (0)1255
423 601

Or
Click Here
To Contact Us

Dura Slab Fibreglass Structural Flooring Panels

 

Dura Slab high quality pultruded fibreglass structural panels for various types of industrial flooring

Dura Slab high quality pultruded fibreglass structural panels for various types of industrial flooring

The benefits of Dura Slab pultruded fibreglass covers and structural flooring panels.

CORROSION RESISTANT

CORROSION RESISTANT

The ability of our Dura Slab flooring to guard against deterioration from industrial chemicals and environmental factors mean that it is a logical and cost-effective alternative to carbon steel, aluminium, wood or other conventional materials. The panels will not corrode even when exposed to continuous submersion, splash, spills, fumes or gases.

CHEMICAL RESISTANT

CHEMICAL RESISTANT

The ability of Dura Slab flooring to guard against deterioration from industrial chemicals and environmental factors makes it a logical and cost-effective alternative to steel or other conventional materials. Dura Slab can resist continuous submersion, splash, spills, fumes or gases. A chemical resistant guide is available on request. Contact us now to get yours.

ANTI-SLIP

ANTI-SLIP

Dura Slab flooring features a gritted surface that provides outstanding anti-slip protection for personnel – in wet and oily environments. The grit is embedded in the top surface of each panel prior to curing. This combination of integral construction, plus depth of the embedded grit, creates a long-lasting maximum anti-slip top surface.

MINIMAL MAINTENANCE

MINIMAL MAINTENANCE

The use of Dura Slab virtually eliminates maintenance. This can drastically reduce costs since painting is not required, and UV inhibitors protect against degradation from the sun which means the material does not need replacing.

EASY INSTALLATION

EASY INSTALLATION

Dura Slab panels weigh about one-quarter as much as steel grating. Two men can easily handle full panels, without the need for hoists, pulleys or dollies. If the panels need to be moved for cleaning, maintenance or utility access, there is less chance of back injuries. The lightweight design of the material therefore reduces installation costs.

SUPERIOR STRENGTH

SUPERIOR STRENGTH

The high glass-to-resin ratio of Dura Slab flooring provides superior strength and load-bearing characteristics. With structural integrity protected by its unique corrosion resistance capabilities, fibreglass lasts longer than traditional materials.

HIGH PERFORMANCE

HIGH PERFORMANCE

Composite structural materials have demonstrated a proven ability to withstand the harsh side effects of corrosive conditions better than galvanised steel. For many years, composites have been reliably used in traditionally corrosive industries such as chemical processing, plating and marine construction.

ALLOWS DEFLECTION

ALLOWS DEFLECTION

Dura Slab design procedures are entirely different from those associated with traditional materials. The prime consideration in designing with fibreglass is allowable ‘deflection’ as opposed to ultimate ‘loading’ used with steel. The inherent elasticity of reinforced plastic, permits far greater deflection than steel, without the danger of structural failure or permanent deformation.

FIRE RESISTANT

FIRE RESISTANT

Dura Slab is available in various resin systems, two of which meet the Class 1 flame spread rating of 25 or less, in accordance with ASTM E-84 Tunnel Test Method and to British Standard Part 7 Class 1. classification.

IMPACT RESISTANT

IMPACT RESISTANT

The construction of Dura Slab Flooring means that even after repeated impacts there is no permanent deformation. The material structure allows deflection, however, once the load is removed, the panel will return to its original shape.

RAISED FLOORS

RAISED FLOORS

Many plant operations have a need for slightly elevated flooring. Fixed or adjustable pedestals can be used for applications up to a height of 600mm.

NON-MAGNETIC

NON-MAGNETIC

The non-magnetic properties allow the panels to be used in sensitive installations where the inherent magnetic properties of other materials would prove unsuitable.

NON-CONDUCTIVE

NON-CONDUCTIVE

The non-conductive properties make Dura Slab panels ideally suited for work platforms and flooring situated in electrically hazardous locations.

LOW INSTALLATION COSTS

LOW INSTALLATION COSTS

Fibreglass weighs considerably less than conventional materials, and is easier and less expensive to transport, install and remove. Only simple hand tools are required for installation and removal, eliminating the need for costly equipment and labour costs associated with heavy lifting, cutting and welding equipment.

MECHANICAL STRENGTH

MECHANICAL STRENGTH

Breaking strength under a lateral force is exceptional. The uni-directional continuous fibreglass reinforcement offers numerous advantages, including rigidity, shock-resistance and no permanent deformation after overloading. These factors provide excellent mechanical strength and a generous factor of safety. Fibreglass is designed for maximum safety in intensive industrial use.

CONDUCTIVE FLOORING

CONDUCTIVE FLOORING

Dura Slab can be supplied with a specially formulated carbon, black surface, which will eliminate hazardous static electricity when properly grounded. It provides a safe environment in combustible areas by not allowing static sparks.

NON-SPARKING

NON-SPARKING

The non sparking qualities of Dura Slab are ideally suited for those installations where hydrogen or other combustible gases may be found. This prevents explosion or fire resulting from sparks produced from accidental dropping of tools onto the panel surface.

LOWER COSTS

LOWER COSTS

Dura Slab can provide significant savings over the use of most other materials when taking into account ‘life cycle costs’. This is due to the fact that heavy installation equipment is eliminated, there is zero maintenance plus the fact that access can be provided for servicing simply by lifting the panels.

Dura Slab Stainless Steel Fixing Systems

Fixing typesFixing types– Nut and bolt
– Fischer Rawlbolts
– Coach screw (Anti-tamper available)
Securing MethodsSecuring Methods– Recessed collar
– Counter sunk
– Dome head bolt and washer
Lifting SystemsLifting Systems– T-Bar lifting handles
– Lifting Eyes (can suit 1,2 or 4 man lift)

Applications

  • Gully Covers
  • Duct Covers
  • Trench Covers
  • Industrial Flooring
  • Work Platforms
  • Service Duct Covers
  • Bridge Decks
  • Tank Covers
  • Chemical Plant Flooring
  • Balcony Flooring
  • Cable Duct Covers

Benefits

  • Anti-Slip surface
  • Light Weight
  • High Strength
  • Fast Installation
  • Health & Safety compliant
  • Allows easy access
  • Anti Corrosive
  • Fire Resistant
  • Impact Resistant
  • Zero Maintenance
  • Suits 1 or 2 Men Lift

Dura Slab Manufacturing Process

Glassfibre rovings and matting reinforcement
Glassfibre rovings and matting reinforcement
Chemical grade resin dip bath
Chemical grade resin dip bath
Final pultruded resin glassfibre Dura Slab
Final pultruded resin glassfibre Dura Slab

Pultruded Dura Slab Profiles are manufactured by combining various resins with pure glassfibre reinforcement. They are formed and cured in a continuous process creating a product of extraordinary strength and resilience. The resultant profile offers a combination of benefits and mechanical properties exceeding those of metal. Weighing up to 80% less than steel and concrete, Dura Slab offers equivalent performance for considerably less weight. This results in major weight savings and lower installation and servicing removal costs due to more economical transportation, handling and on site positioning. The high strength to weight ratio has particular relevance for many applications in the structural flooring industries.

British Standard Slip Resistance Test Results

The B.S. 4592 test was devised to test and assess the slip resistance of industrial type flooring intended for use in water and wet areas. A co-efficient of friction (CoF) is calculated by determining the mean angle of inclination that an operator can safely maintain when the flooring is subjected to a continuous stream of water.

British Standard Test Results

Colours

Standard colours are Green and Grey, other RAL colours available on request for volume orders.

Light Grey
RAL 7047

Note: Due to the printing process colours shown are a guide only.