Anti Slip Floor Panels, Anti Slip Floor Sheets
Fibreglass anti slip floor panels and floor sheets can transform slippery areas
Fibreglass anti slip floor panels fit over existing slippery floors. Quick installation, all fixings stocked.
Anti Slip Floor Panels
Dura Tread anti slip Floor panels have been designed to be installed over new or existing structural members of steel, timber, concrete or aluminium based floors, providing a quick and economical, safe solution to slippery walking surfaces. Typical applications for anti slip floor panels include floor systems, walkways, work platforms, stair ramps and catwalks.
Fibreglass anti slip floor sheets fits over new or existing flooring. Panel sizes up to 2.4m X 1.2m.
Anti Slip Floor Sheets
Anti slip floor sheets fit over existing slippery steel, timber or concrete walkways to reduce slips and falls. Also anti slip floor sheets can be factory cut to special sizes usually at no extra cost. The walking surface of the fibreglass floor sheet is coated with a layer or Angular Quartz grit which is integrally bonded to the surface, this provides an economical safe solution to slippery walking surfaces.
Fibreglass Anti Slip Flooring Solid Plate Is Designed To Be Fitted Over Existing Flooring To Provide A Safe Walking Surface.
Fibreglass Solid Plate
Fibreglass Solid Plate has been successfully used in many industries – including food processing, beverage, chemical processing, water and waste treatment, metal finishing, pulp and paper, transportation, pharmaceutical, textile, oil and gas and mining, smelting and refining. Anti-Slip Fibreglass Solid Plate Flooring is available in sizes 2.4 x 1.2 and 3 x 1 – thickness 4.8mm and 6mm. Continuous sheet solid plate is available by the pultruded process – Maximum width 1.2m – thickness from 3mm to 12mm.
Fibreglass Solid Plate Anti Slip Flooring Fits Over Existing Slippery Floors. Fast Installation. All Fixings Available.
GRP Gritted Solid Plate
GRP Gritted Solid Plate Flooring has been designed for use in applications where durability and long, maintenance-free life is crucial. As a flooring GRP Gritted Solid Plate is usually installed over existing substrates to provide solid walkways, or to extend the life of high traffic areas. Anti-Slip Fibreglass Solid Plate Flooring can also be bolted directly onto structural beams, or used as wall panels that are resistant to corrosive splash when ordered with an un gritted surface.
Standard Panel Sizes: 3m x 1m x 6mm and 2.4m x 1.2m x 4.8mm
GRP Solid Plate To Fit Over Existing Slippery Floors To Provide An Anti Slip Surface.
Angular Quartz is integrally bonded to the top surface, which produces an extremely long-lasting hardwearing surface. This gritted anti-slip texture has one of the highest degrees of slip resistance ever measured for a walking surface.
- Industrial Flooring
- Bridge Surfacing
- Entrance Walkways
- Disabled Ramps
- Fast Installation
- Anti-Slip Surface
- Improved Appearance
- 4.8mm to 12mm thicknesses
- Up to 3000mm length
- Up to 1200mm width
British Standard Test Results
The B.S. 4592 test was devised to test and assess the slip resistance of industrial type flooring intended for use in water and wet areas. A co-efficient of friction (CoF) is calculated by determining the mean angle of inclination that an operator can safely maintain when the flooring is subjected to a continuous stream of water.